News

How To Avoid Jamming During Cable Granulator Machine Operation

I. Control Feeding Rhythm and Maintain Uniform Feeding Avoid feeding too many wires at once or feeding thick, stiff cables in one go. It is recommended to feed every 20 seconds to maintain a contin...

Which Problem Most Affects The Efficiency Of A Copper Granulator Operation?

Decreased output quality: Copper granules mixed with plastic will lower the selling price or even be rejected, resulting in economic losses. Rework is required: Repeated sorting increases energy co...

Common Problems Encountered During Cable Granulator Machine Operation

I. Incomplete sorting (copper containing plastic or plastic containing copper) This is the most common problem, directly affecting the quality of the output and its recycling value. Causes: Mismatc...

Copper Granulator Operation Precautions

I. Pre-start Preparation 1. Check Equipment Status Ensure connecting bolts are tight, belt tension is appropriate, power lines are free from aging or damage, and the main shaft rotates freely witho...

What Is The Working Process Of A Cable Granulator Machine?

1. Crushing Process: Waste wires are first fed into a crusher, where high-speed rotating blades shred the wires into small segments, initially separating the copper core from the plastic sheath. Th...

How To Determine If A Copper Granulator Machine Needs Repair

I. Pre-Start Inspection: Identifying Potential Hazards 1. Fasteners and Structural Condition Check anchor bolts, barrel flanges, and transmission components for looseness. Significant shaking or ab...

How To Safely Operate A Copper Granulator Machine

1. Personal Protective Equipment Preparation Operators must wear anti-static work clothes, conductive shoes, dust masks, safety glasses, and heat-resistant gloves. Long hair must be completely cove...

Common Maintenance Items For Copper Cable Recycling Machines

I. Pre-Start Routine Inspections A quick inspection should be performed before each start-up to ensure safety and normal operation: 1. Check that the power connection is secure, the voltage is stab...

Key Points For Daily Maintenance Of Copper Cable Recycling Machines

I. Daily Pre-Start Inspection A basic inspection should be performed before each start-up to ensure the equipment is in good condition: 1. Check that the power connection is normal, the voltage is ...

Common Faults Of Copper Cable Recycling Machines

I. Copper Granules Containing Plastic or Impurities This is the most common problem of incomplete separation. The main causes are: Insufficient Electrostatic Separation Voltage: The voltage is not ...

How To Operate A Copper Cable Recycling Machine

I. Pre-Start Preparation and Inspection Before starting the equipment, be sure to complete the following checks to avoid malfunctions or safety hazards during operation: 1. Confirm that the power c...

What Is The Workflow Of A Copper Cable Recycling Machine?

1. Crushing: Waste cables are first fed into a shredder or crusher, where high-speed rotating blades tear the cables into small segments, initially separating the copper core from the plastic sheat...