How To Avoid Common Problems During Shredder Machine Installation

1. Conduct thorough site verification beforehand. Select a solid, level cement floor. For large equipment, pour a C30 concrete foundation ≥400mm thick, secure the machine body with anchor bolts, and use a level to ensure the machine body's longitudinal and transverse levelness is ≤0.2/1000 to prevent abnormal vibration and displacement during operation.

2. Standardize component assembly procedures. Before installation, clean debris from the cutter head contact surfaces. Assemble the cutter blades according to weight, calibrate the clearance between the moving and fixed cutters, and tighten all connecting bolts diagonally to the standard torque with anti-loosening devices. Control the coaxiality of the spindle and reducer to within 0.1mm.

3. Strictly implement electrical safety regulations. A qualified electrician should match the power supply line to the equipment's rated power with the appropriate wire diameter, ensure reliable grounding, install overload protection devices, and verify the phase sequence after wiring to prevent cutter shaft reversal.

4. Complete standard debugging and safety configuration. After manually rotating the rotor to confirm that there is no jamming, first conduct a 2-4 hour no-load test run to confirm that the bearing temperature rise does not exceed 75℃ and there are no abnormal noises, and then gradually load the material for testing; install protective covers on all rotating parts and reserve sufficient space for operation and maintenance.