Lubrication Management Of Cable Granulator Machine Is Very Important
Jun 17, 2022
The cable granulator machine is mainly used for the recycling and reuse of waste copper wires, waste wires and waste cables. achieve separation. Due to the special nature of the work, the wear of each structural component is essential. Here, the role of lubricating oil is very large, which can significantly reduce the friction between the equipment and enable the cable granulator machine to operate normally.
During maintenance, the lubricating oil should be replaced in time, so that the cable granulator machine can maintain good working conditions, and at the same time, the wear and tear of the equipment can be greatly reduced, thereby bringing more benefits.
When the equipment is lubricated, the selection of lubricants needs to be combined with the operating environment of the mechanical equipment to ensure that the selection of lubricants is more scientific. In addition, in order to promote the long-term operation of the cable granulator machine equipment, it is also necessary for the staff to strengthen the management of lubricants, classify and store them through scientific methods, and effectively avoid the wrong use of lubricants, thus playing an important role.
If the temperature is high in summer, thicker lubricating oil can be used to increase the service life of the equipment lubricating oil, and the bearing effect is better.
Reduce the consistency of lubricating oil in winter and ensure the operation of small cable granulator machine in low temperature environment. The general replacement cycle of lubricating oil is about one and a half months, and it can be replaced once a month when the temperature is high. This ensures that the device works well.
When using the cable granulator machine equipment, the variable device and protection device should be recorded in detail, and the electrical signal should be studied in depth. Secondly, knowing the lubrication situation of the cable granulator machine equipment and checking the rated oil volume of the lubricating oil tank can ensure the good operation of the chemical machinery and equipment. Again, check the operating status of the equipment to determine whether there is looseness and so on. Strengthen the control of leakage problems such as gas and oil to avoid any hidden dangers.
