Reasons And Solutions For The Abnormal Sound Of The Miscellaneous Cable Granulator Machine Motor

Reason one, uneven cutting.

Solution: Feed evenly, and the amount should not be too much or too little at one time. Too little will waste labor and electricity costs, and too much will block the crushing chamber, requiring manual cleaning and affecting efficiency.

Reason 2: The voltage is too low.

Solution: Check whether the circuit is in good condition, the cable must meet the power requirements, and ensure that the voltage is around 380 volts.

Reason 3: There is a problem with the bearing of the motor or miscellaneous cable granulator machine.

Solution: stop the machine first, then check the cause of the abnormal sound of the motor, and overhaul and replace the bearing.

The miscellaneous wire cable granulator machine is through feeding, primary crushing, secondary crushing, and specific gravity sorting. The angle of the vibrating screen is adjusted according to the copper content and wire diameter. After vibration screening, the copper rice grains and plastics will be automatically separated; the dust at the mixing port It flows into the suction pipe and is sent to the bag filter through the circulating air pipe; the suction pipe above the vibrating screen sucks the plastic fibers and other dust in the space of the vibrating screen to the dust removal device for treatment; the qualified copper rice grains obtained from the copper outlet flow out . The miscellaneous wire cable granulator machine will not produce pollution and human hazards during the production process.