Precautions For The Operation Of Shredder Machine

1. Check before starting:
Make sure all safety protection devices (such as protective covers, emergency stop buttons) are working properly.
Check the power supply line and control line to ensure that there are no exposed wires or short circuit risks.
Make sure there is no debris or residual material at the feed port.
2. Operation process:
The shredder machine must be started without load, and feeding can only be started after it runs normally.
Gradually increase the feeding amount according to the operating status of the equipment (such as the ammeter pointer) to avoid overload.
Pay attention to the operating status of the equipment. If abnormal sound, vibration or overheating is found, the machine should be stopped and checked immediately.
3. Safety measures:
Operators need to wear appropriate protective equipment, such as safety helmets, protective glasses, dust masks, etc.
It is strictly forbidden to touch the dangerous area when the equipment is running.