Main Points Of Dry Cable Granulator Machine Production
Dec 30, 2022
1. Raw materials should be classified and broken during production, and copper wires and aluminum wires must not be mixed together.
2. The wire diameters of each batch of crushed raw materials should be the same size, and the mixing of thick wires and thin wires will affect the sorting effect.
3. The dry cable granulator machine is only used for crushing copper wires and aluminum wires, and shall not be used for crushing other materials
4. Turn on a single machine after powering on, and observe whether the rotation of the motor is consistent with the rotation of the logo. If there is any inconsistency, cut off the power in time and adjust the wiring sequence.
5. The equipment should be started online for 20-30 minutes without load, pay attention to observe the operation of each machine, and observe whether the belt of the feeding conveyor is deviated. Feeding debugging.
In addition, the front-line personnel who operate the dry cable granulator machine need to fully understand the equipment, operate the equipment in the correct way, and have basic troubleshooting capabilities. Only by operating the machine in the correct way and doing daily maintenance and repairs can the working efficiency of wires and cables be increased and their service life extended.
