Do You Know The Production Problems Of Five Plastic Crushers?
Apr 14, 2022
In the field of design and manufacturing of modern plastic machinery, plastic crusher not only depends on the development of mechanical engineering and material science, but also has a close relationship with the progress of theoretical research of plastic engineering.
A specially designed atomizer is added into the fixed fluidized bed to atomize the feed liquid into fine droplets through the atomizer. The droplets are in contact with the materials of different particles in the fluidized bed, and will also adhere to the particle surface to complete the drying and granulation process. The material particles with different particle sizes can be obtained by adjusting the discharge controller.
① With the temperature change of the body of the plastic crusher, the temperature should be raised immediately when the strip is not touched by hand until the strip is touched by hand.
② In case of hand burn or noise at the bearing position of the reducer, stop the machine immediately for inspection and add oil.
③ When the bearings on both sides of the bearing chamber of the main machine of the plastic crusher are hot or noisy, stop the machine for inspection and add butter. During normal operation, the bearing chamber shall be filled with butter every other week.
④ Pay attention to the operation law of the plastic crusher, and deal with the problems according to the situation.
⑤ When the body of the plastic crusher is unstable, pay attention to check whether the gap between the couplings is too tight.
The above problems will have a great impact on the quality of the recycled particles in the whole operation of the crusher, so they can be solved in the whole process of particle regeneration.
